Pumps/Inflation

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly

A precision fork and shock pump with an easy-to-read dial gauge for accurate pressure readings up to 360 psi / 24.8 bar. An air release button and Pressure-Rite connector makes setting proper pressure easy and eliminates air loss when disconnecting, while the flexible hose takes stress off the valve stem when pumping. - Head: Pressure-Rite shock valve - Guage: 360 psi / 24.8 bar, Analog - Handle: Dual density polymer - Dimensions: 21.5 x 4.5 x 4.3 cm / 8.5" x 1.8 x 1.7" - Volume per stroke: 11cc - Barrel: Aluminum - Pressure Tuning: Air release button - Features: Flexible rotating hose - Weight: 170 g / 5.98 oz

Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.

• Large gauge • 160 psi (11 bar) • Dual head fits Presta and Schrader valves

- Tall 26" floor pump requires less bending over and features a 2.5" easy to read gauge - Steel barrel and base with plastic gripped foot pad - Autohead fits Schrader or Presta valves

The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

The Muc-Off Inflator kits help riders quickly inflate their tires and quickly get back to riding in no time. Each kit contains 2x cartridges, 1x compact and durable CNC-machined inflator head with soft-touch press down button which easily controls CO2 release. Dual head nozzle compatible with Presta and Schrader valves and 1x neoprene sleeve to help avoid freeze burn. - Push design to easily control CO2 release - Stainless steel internal pin - Dual head nozzle, compatible with both Presta & Schrader valves - Compatible with most threaded 16g & 25g CO2 Cartridges - Two cartridges included

Keeping your bike's tires properly inflated is the best way to ensure a happy ride. Maintain pressure and avoid pinch flats with MSW AirLift Floor Pumps. - Smart head fits on both Presta and Schrader valves - Steel barrel and steel base - Bleed valve for fine-tuning pressure - Max pressure: 150 psi - Extra-long 48-inch hose - 2.5-inch diameter gauge - Hidden inflation adapter kit for toys, balls & rafts - Overall height: 25-inches

The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit has a water bottle cage as well as everything needed for common road-side fixes: an eight-piece multi-tool, three tire levers, CO2 inflator & cartridges. - Lightweight composite water-bottle cage - Three MSW tire levers - Eight-piece flat pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges

The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit provides everything needed to fix a punctured tire. The kit includes an eight-piece multi-tool, glueless tire patch kit, three tire levers, CO2 inflator & cartridges, and a seat bag to put it all in - 50 cubic inch seat bag with hook-and-loop mounting straps - Three MSW tire levers - Eight-piece flat-pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Glueless patch kit with six patches, sandpaper, instructions - AirLift mini frame pump with a large chamber, locking handle and carrying mount

Carry the essential roadside/trailside tools with the MSW Tool Hugger Kit. The Kit includes all the basics for quick repairs: CO2 cartridges, inflator head, tire levers, mini tool, and patch kit. Bring along your own tube and roll them all up in the Tool Hugger Wrap, which attaches to standard saddle rails, or just toss it into a jersey pocket. - Durable Cordura outer layer - Seven elastic tool compartments - Hook and loop closures

When a flat strikes, this organized kit will get you rolling in no time. Kit Includes: - Control Blast 0 Inflator Head - Mtb Kit: (65067) 2, 25G Threaded Co2 Cartridge - Road Kit: (65066)2, 16G Threaded Co2 Cartridge - Ratchet System Multi-Tool (2, 2.5, 3, 4, 5 ,6Mm Hex, T10, T25 Torx And Flathead) - Liv Tire Levers

Lezyne's Alloy Drive mini-pump quickly inflates your tires so you can get back on your bike. Its CNC-machined aluminum barrel and handle help you get pumped up to 90 psi in a flash. And, making your inflation experience even easier is a Presta and Schrader compatible Air Bleed System Flex Hose that stows inside the handle when not in use.

- 30 psi, 2.1bar - High-volume, portable pump optimized for plus-size tire systems - CNC machined aluminum barrel, piston - Tubeless tire repair kit storage in handle - CO2 Speed Drive and 20g CO2 included - Presta/Schrader valve chuck

Lezyne's Caddy Sack CO2 is a complete CO2 inflator and tire repair kit in a simple, weather resistant, reusable pouch. This kit includes a Caddy Sack, Twin Speed Drive, two threaded 16g CO2 cartridges, Power Levers, and a Smart Kit, all the essentials needed to fill your pack for the unexpected tire repair.

Replacement Composite Matrix pump mount for all High-Volume hand pumps (HV, Tech HV, Micro Floor HV/HVG, Alloy, Carbon Drives). Includes Velcro pump strap.

Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with 16g threaded cartridges. - CNC machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges - Comes with one 16g cartridge

Lezyne's lightweight, powerful HV Drive mini-pump quickly inflates your mountain bike tires so you can get back to pedaling. Its oversize aluminum barrel and no-slip Composite Matrix handle help you get pumped up to 90 psi in a flash. And, making your inflation experience even easier is a Presta/Schrader-compatible hose that stows inside the handle when not in use.

The Pressure Over Drive is a floor pump with an integrated system designed to seat tubeless tires. This offers tubeless tire users a portable alternative to air compressors and eliminates wasting CO2 cartridges. It features a secondary chamber that can be manually pressurized and then released with the integrated foot-lever. This provides a strong, continued blast of air capable of seating road, mountain and plus-sized tubeless setups. It’s built for durability and reliability with its steel and aluminum construction, and its aesthetics are enhanced with a comfortable, stylish wood handle. The Pressure Over Drive has a 220psi (15 bar) pressurizing limit, with a built-in safety release in the event of over inflation. It comes equipped with an extra-long, nylon-reinforced braided hose and our Presta/Schrader-compatible ABS2 chuck. It can also be used as a regular floor pump. - ABS2 equipped

Lezyne's lightweight, powerful Road Drive mini-pump quickly inflates your tires so you can get back on your bike. It features an aluminum barrel and handle so it looks stylish and lasts long. Plus, it's capable of reaching up to 160 psi in a flash and is Presta-valve compatible. What's more, its hose flexes to reach tricky valve stems and also stows in the handle for maximum portability.

INSTANT SOLUTION Efficiency and convenience are two key feature that Giant mini pump pursuit. The Control Mini+ pump with several refined technologies from handle material to inner structure design, provide you immediately inflate solution. Features - Durable alloy barrel - Tactal off-road grip handle design and comfort - Longer stroke design creates more volume per pump - Extendable hose with a threaded valve for Presta and Schrader use - 120psi Max pressure - Includes mounting bracket

Classic shock. The new Control Shock 1 features a classic 1.6” analog classic design with 400psi maximum pressure. Two-stage valve technology ensures that you won’t lose air when disconnecting the pump. And our extended valve head design makes it easier to access tight valve locations. Features - CNC machined aluminum barrel - Aluminum housing and gauge - 1.6” diameter pressure gauge - Air pressure release button - Extended Valve Head Design - Two Stage Valve - 400psi Max

- Rotatable 1.25” gauge - Pinch-Free T-handle design - High Pressure/High Volume switchable system - Fold out foot pad for fast, stable inflation - Roller System valve head eliminates twisting while threading onto valve - 120 PSI Max

- Easy-to-read 3.0" gauge - AutoHead™ with ball inflator accessories - Aluminum barrel and plastic base - 160psi rating

When a flat strikes, this organized kit will get you rolling in no time. Kit Includes: - Control Blast 0 Inflator Head - Mtb Kit: (65067) 2, 25G Threaded Co2 Cartridge - Road Kit: (65066)2, 16G Threaded Co2 Cartridge - Ratchet System Multi-Tool (2, 2.5, 3, 4, 5 ,6Mm Hex, T10, T25 Torx And Flathead) - Giant tire levers

- Includes everything for a quick fix while on or off-road - Giant seat bag - 12 glueless patches - 2 tire levers - Mini pump - 9 function multi-tool

The Genuine Innovations deluxe kit offers a complete CO2 bicycle tire repair and inflation solution for all your flat tire needs. Comes with everything needed to repair and inflate multiple flat tires, all packed in an easy-to-store zippered wallet. Featuring the popular Ultraflate cupped inflator, this deluxe repair kit is so quick and easy to use, you'll be back to riding your bike in no time! - Repair and inflate multiple tires - Quick inflation - Compact and stores easily - Full kit weight: 292 grams - Compatible with non-threaded 20 gram CO2 cartridges and threaded 16 gram, 20 gram and 25 gram CO2 cartridges - Works with both Presta and Schrader valves - Store a non-threaded 20 gram CO2 cartridge in the cup Includes: (1) Ultraflate inflator with trigger-controlled technology (3) 20 gram non-threaded CO2 cartridges (1) Small patch kit (6 patches and 1" square sand paper) (2) Tire levers (1) 5.5" L x 6.5" W padded, zippered wallet

High Pressure Shock Pumps to maintain your shock and seat post air pressure. - Max. pressure 350PSI covers all shocks (350PSI is the max psi on DPS and DPX2) - Durable stainless swivel pump head (UP-SA) allows for pump to access shocks where linkages would get in the way with a traditional pump head - 6063 alum barrel and handle - Micro-adjust 2-3 PSI air-bleeder - Foldable hose